Government Fittings

Hydraulic Fittings

At every level of government, work is granted to builders and contractors on behalf of the governing body. Governmental agencies contract out work in masonry, electrical, water, sewer, and heating/air conditioning fields, as well as all types of general construction. All of these jobs require fittings of some sort, and governments usually have guidelines as to what types of fittings they want used in specific jobs.

Uses for Government Fittings

Many different types of fittings made from a variety of materials are used in the course of government work. From large, industrial fittings used in road construction down to small fittings needed for small lines on equipment and in structures, government fittings are available in many different styles.

High Pressure Fittings: Government work can sometimes involve specialized equipment. Drilling projects, for instance, can be a government project, and the types of equipment used in this specialized field require high-pressure fittings. These fittings can be required to withstand 150,000 psi and are generally made of stainless steel. These fittings are available in common designs such as tees, angles and quads.

Conduit Fittings: Governments often contract out electrical work. Conduit tubing is used to insulate electrical lines, and that conduit is held together by fittings. Conduit fittings are generally made of plastic and include adapters, unions, reducers, elbows and all the configurations an electrician would need to run electrical lines over, under and through the necessary spaces.

Pipe Thread Fittings: Pipe thread fittings are a very basic design, using threaded ends to fasten a fitting to a pipe. Pipe thread fittings are best used in low pressure situations, but they are a cheap and easy alternative in the proper situation.

O-Ring Fittings: O-ring fittings are used in hydraulic applications. Instead of the fitting simply threading to the pipe, there is an elastomeric seal in the connection. This seal is compressed upon the tightening of the threads, thereby creating a tight seal that is able to withstand high pressure demands.

Types of Government Fittings

Fittings used in government contract work are composed of a wide array of materials. The widely varied type of work commissioned by governments means that fittings of every design will come into play. Some of the materials used to make government fittings are:

Stainless Steel - Stainless steel fittings are used in high pressure situations. Stainless steel's tough alloy makes it ideal for situations where strength and durability are crucial. Stainless steel fittings are also very resistant to corrosion and can withstand temperature extremes. Stainless steel fittings are certainly not the cheapest, but they are the best for creating a secure connection.

Plastic - Plastic fittings - generally PVC (Polyvinyl Chloride) or PP (Polypropylene) - are used in all types of sewer and drainage construction. Plastic fittings do not hold up against extremes of temperature or against violent collision, but they are perfectly suited for passive flow systems buried underground where temperature remains fairly constant and there is little chance of blunt force strikes against the fitting.

Brass - Brass is a very universal type of fitting. It is perfect for medium pressure and medium temperature extremes. Water and air systems are good uses for brass fittings, as they do not corrode and their soft metal makes for strongly seated threading. Brass is also relatively inexpensive when compared to stainless steel. Brass fittings come in a huge variety of designs and thread types. Brass is the most universal of all the fitting types.

Black Iron - Black iron fittings are used for pipes that deliver gases such as propane or natural gas. Black iron fittings, when combined with pipe dope or Teflon tape, create a secure joint. However, black iron fittings are vulnerable to corrosion, so they should not be used in any situation where oxygen will be present in the pipelines.

Who Needs Government Fittings?

When a government agency is sponsoring a job, chances are good that there will be very specific requirements for the type and quality of materials to be used. Because of this, any contractor or entrepreneur looking to take on government contracts should be very aware of the best types of fittings to work in harmony with government specifications.

This is why it is important to understand the different dynamics of each connection that will need to be made on behalf of the government in a project. If you are unsure at all about the specifics of a government contract regarding piping and how it should be connected, make sure to contact the experienced pros at Hydraulic Fittings USA. They will get you the exact fittings you need so that you can comply with government regulations.

Thank you for visiting our Government Fittings.